CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 26)

EdgeAccess Universal Chassis System
4.5.1 Hardware Configuration Screen
The Hardware Configuration report shows various configuration settings, including the module type,
with model and revision numbers, and the power supply status. In addition, it shows information
about the types of User and Extension ports. Use this information when troubleshooting, such as
tracking down an error in a data link or the configuration. To view the Hardware Configuration
screen, see Figure 12 and follow these steps:
1. From the Main Menu, type 1 , "System Configuration," and press <Enter>. The System
Configuration menu appears.
2. From the System Configuration menu type 1 , "Hardware Configuration," and press <Enter>.
This report shows the data rate, connector type, and wavelength (if fiber) for each port; see
Figure 13.
3. To return to the System Configuration menu, press <Esc>.
HARDWARE CONFIGURATION
Local Remote
Chassis Type 5U UCS 1000 2U UCS 1002
Chassis/Slot 4/3B 2/5
CLIM Type L357-1113 L357-1113
User Port 10/100/1000M/UTP/RJ45 10/100/1000M//UTP/RJ45
Extension Port 100 1310 SM SC 10d 100 1310 SM SC 10d
Serial Number 20030590295 20030590296
Hardware Rev. A1 A1
Power Supply Pri DC Non Iso DC
Power Supply Sec AC 120/240 DC
Fan Status OK OK
Chassis Temperature N/A OK
Figure 12. Hardware Configuration Screen
REMOTE HARDWARE CONFIGURATION
Model Number N525
Hardware Rev. B2
Serial Number 20030590295
User Port Model Number 500-3300
User Port Description 10/100/1000 UTP
User Port Hardware Rev. CA
User Port Serial Number 20030590296
Ext Port Model Number 9400-528
Ext Port Description 1000M LX 1310/SM/7dB/SC
Ext Port Hardware Rev. A1
Ext Port Serial Number 20030590297
Power Supply AC 120/240
Figure 13. Remote Hardware Configuration Screen
L357 Gigabit Ethernet Service Unit 4-6