CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 34)

EdgeAccess Universal Chassis System
4.5.6 Security Configuration
The Security Configuration menu provides options to set values for general parameters for passwords,
lockout, and logout. To access the Security Configuration screen, see Figure 25 and Table 8 and
follow these steps:
1. From the System Configuration menu type 6 , "Security Configuration," and press <Enter>.
2. At the Security Configuration screen, type the number for an item and press <Enter>, then press
<Space> to cycle through the options and press <Enter> to select an option.
3. To return to the System Configuration menu, press <Esc>.
SECURITY CONFIGURATION
PASSWORD CONFIGURATION
1. Minimum Length : 0
2. Minimum Alpha Characters : 0
3. Minimum Numeric Characters : 0
4. Minimum Punctuation Characters : 0
5. Maximum Consecutive Character Types : 0
6. Maximum Same Character : 0
7. Allow username in password : Disabled
8. Password Expiration Time : 0
9. Password Reuse Count : 0
LOCKOUT/LOGOUT CONFIGURATION
10. Lockout After Failed Attempts : 0
11. Lockout Type : Hard
Lockout time : 0
12. Display Lockout Message : Disabled
13. Lockout Message : Account has been locked out
14. Lockout Craft Port : Disabled
15. Inactivity Logout time (mins) : 0
Figure 25. Security Configuration Screen
Table 8. Security Configuration Option Definitions
Menu Item Description
1. Minimum Length
2. Minimum Alpha Characters
3. Minimum Numeric Characters
4. Minimum Punctuation Characters
5. Maximum Consecutive Character
Types
6. Maximum Same Character Define characteristics of passwords; the range for all
fields is from 0 through 15
7. Allow username in password Enable or disable the username appearing as or within
the password
8. Password Expiration Time Set how often in days, 1 through 365, that the passwords
must be reset; 0 = disabled
L357 Gigabit Ethernet Service Unit 4-14