CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 39)

EdgeAccess Universal Chassis System
4.8 System Alarms
Use the System Alarms screen to view alarms and faults on the L357. See Figure 31. To view alarm
status:
1. From the Main Menu, type 4 , "System Alarms," and press <Enter>. The System Alarms screen
appears.
2. When you finish checking the Alarm status, press <Esc> to return to the Main Menu.
SYSTEM ALARMS
Local Remote
Configuration Errors No No
User Port Up Up
Extension Port Up Up
Remote Fault User/Ext N/A N/A
Ext Port Remote Fault No No
Link Loss Echo User/Ext No No
Link Loss Fwd Ext->User No No
Link Loss Fwd User->Ext No No
Side Band Mgmt Channel OK OK
Chassis Management OK OK
Alarm Relay Inputs N/A N/A
Power Supply Primary OK OK
Power Supply Secondary OK OK
Fan OK OK
Chassis Temperature N/A OK
Figure 31. System Alarms Screen
4.9 Layer 2 Statistics
Use the Layer 2 Statistics screen to view data transfer protocol statistics on the L357. See Figure 31.
To view layer 2 statistics, follow these steps:
1. From the Main Menu, type 5 , "System Alarms," and press <Enter>. The Layer 2 Statistics screen
appears.
2. To reset the counters, press <Ctrl-R>.
3. When you finish checking the statistics, press <Esc> to return to the Main Menu.
L357 Gigabit Ethernet Service Unit 4-19