CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 36)

EdgeAccess Universal Chassis System
• UI Password: password that allows access through Telnet, Console, SSH, FTP, or SFTP; 8 to 15
characters
• UI Password Expires: Yes or No
• UI Password Expires in (days): 0 (never) to 365
• Allow UI Lockout of User: Yes or No; can disable access for this user after excessive failed
attempts to log in
• Allow UI Logout of User: Yes or No; can automatically log user out after excessive inactivity
• UI Logout Locked State: shows current state as Locked, Unlocked, Logged out, or Logged in
• SNMPv3 Authentication Protocol: MD5, SHA, or None; sets how to authenticate the user
• SNMPv3 Authentication Password: password that generates the authentication key for the user if
the authentication protocol is MD5 or SHA; 8 to 15 characters.
• SNMPv3 Authentication Key: Shows the key that authenticates the user for MD5 or SHA
Authentication Protocol; this is generated automatically for the Authentication Password, but can
be changed if the user's host uses a different Authentication Key generation algorithm; 16 Hex
characters for MD5 protocol or 20 Hex characters for SHA protocol.
• SNMPv3 Privacy Protocol: DES or None; sets the protocol for encryption
• SNMPv3 Privacy Password: password that generates the encryption key for the user if the
privacy protocol is DES; 8 to 15 characters
• SNMPv3 Privacy Key: Shows the key that encrypts messages for DES Privacy Protocol; this is
generated automatically for the Privacy Password, but can be changed if the user's host uses a
different Privacy Key generation algorithm; 16 Hex characters
3. To delete a user, type 2 , then follow the prompts to select the user name and confirm the choice;
the User Accounts screen reappears.
4. To return to the System Configuration menu, press <Esc>.
4.5.8 System Information Screen
The System Information menu provides options to enter general information about this module in the
system. To access the System Information screen, see Figure 27 and follow these steps:
1. From the System Configuration menu type 8 , "System Info Configuration," and press <Enter>.
2. At the System Information screen, type the number for an item and press <Enter>, then follow the
prompts to type in your information.
3. To return to the System Configuration menu, press <Esc>.
L357 Gigabit Ethernet Service Unit 4-16