CANOGA PERKINS 9145E Network Interface Device - Manual (Page 15)

Introduction 9145E Ethernet Network Interface Device User’s Manual
Hardened 9145E Specifications
3
1.3 Hardened 9145E Specifications
1.3.1 Physical Characteristics
• Dimensions: 1.75" H x 8.25" W x 11.5" D (44.5 x 209.5 x 292 mm)
• Weight: 4.75 lb to 5.1 lb (2.15 Kg to 2.31 Kg) (depending on model)
1.3.2 Environmental Characteristics
• Operating Temperature: -40°C to +65°C
• Operating Humidity: 0 to 90% Relative Humidity (non-condensing)
1.3.3 Power Requirements
• 48VDC (36 to 72VDC), 1 Amp
• 24VDC (18 to 36VDC), 2 Amps
1.3.4 Regulatory Compliance
• EN60825-1 (laser safety)
• CE Mark
• EMC Directive (EN55022 Class A, EN 55024, EN 61000-3-2/-3-3)
• ETL, cETL & LVD (U.S. UL60950, CAN/CSA C22.2 No. 60950, EN/IEC 60950)
• FCC Part 15B Class A (U.S.), ICES-003 (CAN), VCCI Class A (Japan), C-Tick
(AS/NZS 3548 - Australia)
• NEBS Level 3
• GR-3108 Class 2
• ETSI 300-019 Class 3.3
1.4 Mounting Options
• 19-Inch or 23-Inch rack mount (single unit or two units side by side in a 1U)
• Wall Mount (face down or to either side)
• Table Top
Reference Chapter 3, Installation, for installation procedures.