CANOGA PERKINS 9145E Network Interface Device - Manual (Page 42)

9145E Ethernet Network Interface Device User’s Manual Operation
Interface Management
30
4.2.1 Setting Up the VT-100 Terminal
When using the console port, you can use the HyperTerminal Emulation program that is included
with Microsoft Windows operating systems. The Telnet session is only available after the man-
agement TCP/IP configuration is completed.
NOTE: The Microsoft Vista operating system does not include HyperTermi-
nal. If your terminal interface computer uses Windows Vista, you
will need to use a separate terminal emulation program.
The following steps describe how to set up HyperTerminal on your PC.
1. Select Start>All Programs>Accessories>Communications>HyperTerminal. The New
Connection - HyperTerminal
window will open.
2. Enter a name for the connection to the system in the Name box, select an icon to identify
this connection on your desktop, and click OK. The Connect To window will open.
3. Select COM from the Connect using drop down menu, and click OK. The Com1 Proper-
ties
window will open.
4. At the COM 1 Properties window, on the Port Settings tab, select the following from the
appropriate dropdown menus, then Click Apply:
• Bits per second: 9600 bps
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None
5. Click OK. HyperTerminal connects to the system and VT100 terminal emulation starts.
6. In the Hyperterminal window, select the Properties button from the tool bar, select the
Settings
tab, select VT100 from the Emulation drop down menu, and click OK.
7. Default username is admin
8. Default password is admin (case sensitive)