Product operation, Front panel layout, Front panel layout -1 – Dynon Avionics EMS-D120 Pilots Users Guide User Manual
Page 11
3. PRODUCT OPERATION
After reading this section, you will be familiar with the basics of how to use your EMS-D120. For details regarding
specific procedures (e.g., adjusting display brightness, using the fuel computer, setting the clock, etc.) please refer to the
EMS Operation section.
Front Panel Layout
All normal operation of the EMS-D120 happens via the front
panel. The front panel contains buttons and a display.
Buttons – There are six buttons on the front panel of the
EMS-D120. Throughout this guide, these buttons are
referred to as one through six, with button one being the
leftmost and button six being the rightmost. EMS-D120
buttons are used to turn the instrument on and off, cycle
between screens, scroll through menus, and adjust
instrument parameters.
Display – The display shows engine parameters, menus, and
data obtained from other connected products.
EMS-D120 Pilot’s User Guide
3-1
User interaction takes place via the EMS-D120 main
display and the six buttons beneath. Note: buttons are
not labeled on actual product
1 2 3 4 5 6