Dynon Avionics EMS-D120 Pilots Users Guide - Manual (Page 40)

EMS-D120 Pilot’s User Guide 8-1
8. APPENDIX
This appendix contains information not covered in the main section of the manual. This section contains reference tools
such as a detailed description of the serial data format output by the EMS-D120, a specifications sheet, and a
troubleshooting guide. This section also contains details regarding EMS-D120 servicing.
Appendix A: Serial Data Output
The EMS-D120 outputs text data through its serial port constantly during normal operation. Technical information on the
installation and connection to this serial port can be found in the EMS-D120 Installation Guide. To log EMS data you
must connect the serial port to a PC. This serial data can be logged using any standard serial terminal program such as
HyperTerminal®. It can then be parsed into its respective columns by many spreadsheet programs including Microsoft
Excel®. All numbers are output in decimal and are standard ASCII. To view the data using a terminal program, the
following settings should be used for the serial port:
Baud rate:
115200
Data: 8 bit
Parity: none
Stop: 1 bit
Flow control: none
EMS SERIAL DATA OUTPUT
The format for the data sent out the EMS RS232 port follows. General purpose and contact inputs which are sourced
from the HS34 are not output via the serial stream.