Step 3: flightdek-d180 encoder format – Dynon Avionics FlightDEK-D180 Installation Guide User Manual
Page 150
Advertising
Appendix
9-34
FlightDEK-D180 Installation Guide
EFIS
DB25
Pin#
Dynon EFIS
harness color
Encoder Converter
Function
Wire Color
13
Blue/W
b
harnesses)
reen (M
older m
ial Encoder
Transmit
hite (may be
lack on some
G
ay be Red on
odels)
Ser
21
White
Black
Serial Encoder Ground
STEP 3: FLIGHTDEK-D180 ENCODER FORMAT
For proper communication the EFIS Altitude Encoder format must be set to format number one.
T
E > SETUP > MORE > ALTENC.
o change this setting, from the main menu, select: MOR
Press FRMAT until it reads “1.”
Advertising