Leica Geosystems Leica DISTO Pro - Manual (Page 26)

28 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
Basic settings, contd.
A fourth language can be
loaded into the DISTO via the
interface (read Online documentation
on the CD-ROM supplied).
After pressing the Enter key a short
confirmation appears in the selected
language and the menu function is
terminated.
DISTO changes to Normal mode and
displays the selected language in the
basic settings.
Beep (3.3)
Set a beep to sound for keypresses
and / or when measurements are
being made.
/ After pressing the Enter key
- reset is done immediately,
- a short confirmation is displayed,
- the menu function is terminated.
DISTO changes into Normal mode
and displays basic settings.
Lighting (3.5)
This submenu is used to switch
lighting on or off.
Default setting: off (3.5.2)
On (3.5.1)
Switches display lighting on.
After pressing the Enter key a short
confirmation appears and the menu
function is terminated.
Beep on / off
One of these symbols will be
displayed after switching the DISTO
on.
While the symbol for "Beep on"
disappears subsequently the symbol
for "Beep off" remains permanently
displayed.
Default setting: key (3.3.2)
Measure (3.3.1)
Every measurement made is
confirmed with a beep.
Key (3.3.2)
Every key press is confirmed
accustically.
Off (3.3.3)
Beep is switched off.
Error messages and
switching off the DISTO are
always accompanied by a beep.
Reset (3.4)
Resets customer settings of the
DISTO to basic settings.
Language (3.2)
Set language the DISTO uses for
messages, settings, etc.
The language selected for
first time use can be changed
in this submenu.
Default setting: none
Selectable languages:
German (3.2.1)
English (3.2.2)
French (3.2.3)
language 3.2
English
1 Deutsch
2 English
3 Français
beep 3.3
1 measure
2 key
3 off
lighting 3.5
1 on
2 off