Leica Geosystems Leica DISTO Pro - Manual (Page 47)

49 DISTO™ pro 4 / pro 4 a-1.0.0en English
en
Select desired memory
location with navigation keys
or by keypad input.
If desired the selected memory
location can be reserved to transmit
data to a PC.
Press briefly to reserve
memory location.
This symbol is displayed.
Memory location and
contents remain unchanged.
Press Clear key again to free up the
memory location for data transfer .
Memory, contd.
Cancel menu function?
Press briefly to display the
submenu "data" (6.4) or
press and hold to display the
basic settings.
Erase ?
Press briefly.
After erasing the data memory a
confirmation is displayed and then
the basic settings.
5.125m
change 6.4.3
200
:200
: 25%
Press briefly to start making
changes.
Place cursor with the
navigation keys on the line to
be changed.
To delete press briefly.
Enter new text or value with keypad
or recall it from the memory keys or
from the stack.
Press and hold as desired.
To add a measurement unit
press (repeatedly).
A line of text can be replaced
by a list. Read menu
function Store (6.4.2).
Press briefly to store
changes.
After a confirmation the basic
settings are displayed.
Erase (6.4.4)
This menu function erases the entire
data memory.
After calling up this menu function, a
request is displayed.
erase
entire
memory ?
DISTO
send 6.4.5
1 all
2 position
Send (6.4.5)
This submenu transmits the contents
of the data memory via the data
interface to a PC or a laptop.
All (6.4.5.1)
This menu function transmits the
entire data memory contents.
During transmission, the number of
the current data memory location
being transmitted from is displayed.
At the end of the transmission the
submenu is displayed again.
Position (6.4.5.2)
This menu function transmits certain
locations of the data memory.