Leica Geosystems Leica DISTO pro /pro4a - interface manual User Manual
Page 15
3350-RUEA
Error! Style not defined.
I:\DIST\Marketing\0Temp\Doc\interfaceManual111_en.docSeite 15 von 18
Erstelldatum: 17.06.03
6 D
ATA
F
ORMATS FOR
D
ATA
T
RANSFERS
Data transfer is divided into 3 categories. The division is determined by the manner in which
the data to be transferred was handled. The categories are:
Data transfer to protocol
This transfer is activated via the HMI and can be switched off again. All measured and
calculated values, intermediate results and results of functions as soon as they are avail-
able, are transferred via the interface. They can be used to create a protocol of the meas-
urements.
Manual data transfer
This transfer is activated via the HMI. Values stored in memory are sent via the interface.
These data can be selected.
Remote data transfer
Transfer is started via the interface. Either the entire memory contents is transferred or a
measurement is made and only data from that measurement are transferred. Measure-
ment reference in this mode is always the basic settings of the mode (tenths of millime-
ters, reference point: surface of front lens).
6.1 Example: data transfer to protocol
Function:
Triggering a distance measurement with the keypad
Output:
WI31<cr><lf>
or @Exxx<cr><lf>
6.2 Example: manual data transfer
6.2.1 Text
Function:
Transferring a data set only containing text
Output:
!Renovation of court in sports park<cr><lf>
?<cr><lf>
or @Exxx<cr><lf>
Remarks :
Every data set ends with a terminator
“?“ as confirmation of the end of the function.
6.2.2 Single data set
6.2.3 Function:
Transferring a data set with all information
Output:
WI11 WI31 WI71 WI72 WI73<cr><lf>
?<cr><lf>
or @Exxx<cr><lf>
Remarks :
Every data set ends with a terminator
“?“ as confirmation of the end of the function.
6.2.4 All data sets
6.2.5 Function:
Transferring a data set with all information
Output:
WI11 WI31 WI71 WI72 WI73<cr><lf>
WI11 WI31 WI71 WI72 WI73<cr><lf>
WI11 WI31 WI71 WI72 WI73<cr><lf>
....
?<cr><lf>
or @Ex<cr><lf>