Leica Geosystems Leica DISTO pro /pro4a - interface manual - Manual (Page 6)

3350-RUEA Error! Style not defined.
I:\DIST\Marketing\0Temp\Doc\interfaceManual111_en.docSeite 6 von 18 Erstelldatum: 17.06.03
72 72....+xxxxxxxx Coding the measurement
73 73....+xxxxxxxx Coding the measurement
202 202...+xxxxxxxx Coding the end cover
314 314.0u+xxxxxxxx Area output
315 315.0u+xxxxxxxx Volume output
940 940...+xxxxxxxx Print serial number
941 941...+xxxxxxxx Print date of production
996 996...+xxxxxxxx Battery charge
5000 5000..+xxxxxxxx Key codes
3.3 Error codes
Error codes in the DISTO
TM pro 4 / DISTO TM pro 4 a, in the 400 to 899 range and error numbers
between 200 and 299, are related to the internal distance measurement module.
No Format Meaning
DISTO TM pro 4 / DISTO TM pro 4 a :
401
@E401
Invalid parameter
402
@E402
Fatal error has occurred
404
@E404
Functions interrupted
501
@E501
Invalid EEP-range
502
@E502
Invalid data set number
503
@E503
Calibration incomplete
504
@E504
No distance available
505
@E505
Memory is full (800 data sets)
651
@E651
Module response timeout, module is not responding
702
@E702
Invalid command
703
@E703
Wrong parameter
704
@E704
Wrong dimension m, m2, m3
705
@E705
Zero division
706
@E706
Number too large for display
707
@E707
Menu entry too long
751
@E751
Invalid interface command
752
@E752
Invalid WI-conversion
753
@E753
Invalid result at conversion
754
@E754
Received question mark
755
@E755
Application not in basic mode (->press clear-key)
756
@E756
Application not in online mode
757
@E757
No end cover selected
801
@E801
Invalid EEP address or length
802
@E802
Checksum wrong or saving failed
803
@E803
EEP is empty
804
@E804
No valid sign received while communicating with the RS232
805
@E805
Buffer overrun while communicating with the RS232
806
@E806
Parity error while communicating with the RS232