Leica Geosystems Leica DISTO pro /pro4a - interface manual - Manual (Page 8)

3350-RUEA Error! Style not defined.
I:\DIST\Marketing\0Temp\Doc\interfaceManual111_en.docSeite 8 von 18 Erstelldatum: 17.06.03
Commands
3.4 Operational modes
DISTO
TM pro 4 / DISTO TM pro 4 a, have various operational modes.
?? Offline mode: Default: DISTO TM pro 4 / DISTO TM pro 4 a, are in this mode after power has been
switched on (press the measurement key or any character on the interface). Principally, the
instrument is operated with the keypad and the results of the measured values are transmit-
ted to the serial interface (depending on menu setting). Measured values displayed take into
account the measurement reference setting and the measurement units. Furthermore, saved
data sets (text or measured values) can be displayed using the key functions. Additionally,
measurement commands can be given via the interface (in place of the keypad).
?? Online resp remote mode: In online mode DISTO TM pro 4 / DISTO TM pro 4 a, are not controlled
and operated via the keypad but from a PC. To switch to online-mode (’ONLINE’-is dis-
played) the appropriate signal has to be sent. Then functions for measurements, display set-
tings and keypad entries are made available. A separate command switches between the
modes. All measurements done in this mode use the lens surface as measurement refer-
ence.