Panasonic KX-E4500 - Manual (Page 19)

EXPR
:J ! J ^
fr^
1 ^,
ii
<> 1
O
TAB SET
-RELOC
0
-R. MGN
O
TAB CLR
0
-L. MGN
•BACKSPACE
-INSERT
1 i i
h
M j
i '
' 1
ifioigsi
(CANCEL)
RETURN
pQUICK ERASE
-ESC
■i (INDEX)
T (REVERSE
INDEX)
SPACE BAR
Moves the printhead to the beginning of the
line without line spacing.
Moves the cursor up one line in memory.
Sets TAB stop positions (maximum 28).
Moves the printhead to the last character on
the paper.
Moves the cursor to the right in memory.
Sets the right margin. Used with the CODE
key, it sets the hot zone.
Moves the cursor down one line in memory.
Clears TAB stops. When used with the
CODE
key, it clears all tabs, or all margins and tabs.
Moves the cursor to the left in memory.
Sets the left margin.
Moves the printer one space to the left.
The INSERT/FWD-" key is used primarily
when editing text on the display.
In the Typewriter Mode, it is the Forward
(FWD-*) key and advances the cursor one char­
acter to the right on the display.
In the Memory Mode, it acts as a toggle be­
tween the insert and overtype methods of typ­
ing. Insert, which is the default setting, enables
you to add words between existing text. Over­
type replaces existing text with newly typed
characters.
Deletes the character to the left of the
printhead.
Advances one line down, and brings the
printhead back to the left margin.
Deletes the entire word to the left of the
printhead.
Cancels current pop up or prompt.
Advances a line toward the bottom of the
page.
Moves a Vi line toward the top of the page.
Advances the printhead to the right. When
used with the CODE key, it moves the
printhead Vfeth of an inch if your pitch is set on
10 .