Panasonic KX-E4500 - Manual (Page 84)

Editing a Ruler in Text Memory
+
F
FORMAT
E
EJECT
or
When a ruler is edited in memory, all text typed under that ruler
is automatically reformatted to the new settings. It is not possible
to store a new ruler setting while in memory.
The Edit Ruler procedure is the same in typewriter or memory
mode. Therefore, the FWD-+ key is used to move the printhead
to the right and the BACKSPACE key is used to move the
printhead to the left. Remember, it is not necessary to clear the
current left and right margin or hot zone before setting new ones.
The new settings will automatically clear the old settings. How­
ever, unwanted tabs must be cleared by positioning the cursor on
the unwanted tab (represented by the letter “T”) and pressing
TAB CLR.
1 Press CODE + F
Your display will prompt;
RULER
Edit Ruler
Recall Ruler
Line Spacing
RETURN or ESC
2 Press E (for Edit Ruler)
Your display will prompt:
EDIT RULER
1 Current Ruler
X Ruler
Y Ruler
Z Ruler
RETURN or ESC
3 Press X, Y, Z, or C (for Current Ruler)
Your cursor will be positioned at 0 on the ruler line.
4 Make the desired changes
5 Press RETURN to enter
Text typed after the ruler change will automatically reformat.
74