Changing the correction tape – Panasonic KX-E4500 User Manual
Page 237
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Changing the Correction Tape
1 Lift out the ribbon cartridge and remove the two spools of
lift-off tape
2 Place the loaded spool of the new tape on the left pin
3 Feed tape around white spools. Place empty spool on the right
pin
4 Manually turn the right hand spool counter-clockwise, tight
ening the tape until resistance is felt
5 Replace the typing ribbon cartridge
227
Advertising