Out of the correction memory – Panasonic KX-E4500 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Out of the Correction Memory
When you reach the last line in the correction memory, the
KX-E4500 will beep and you will be unable to use the
BACK
SPACE
or
CODE + REVERSE INDEX
( f ) keys to advance to
the previous line. Two methods of correction are available outside
of the correction memory; the No Print method and Manual Cor
rection .
+
T
PREVIOUS
+
SPACE BAR
<xl
BACK
SPACE
Using the No Print Method
The No Print method enables you to retype errors into the correc
tion memory without re-printing them. This feature is especially
useful when correcting errors typed in proportional spacing (PS),
or in the JSTFY mode.
1
Press
CODE
-1-
CANCEL
((^) to exit the correction memory
2
Press
REVERSE INDEX (
f
)
to position the printer on the
desired line
3
Press the
CODE
+
key
The message “NOPRINT” will appear.
4 •
If the text was typed in 10, 12, or 15 pitch:
Position the mode selector to
NORM
SPACE
to position the printer on the error and retype the
incorrect characters
• If the text was typed in
PS
pitch:
Retype from the beginning of the line to the error
• If the text was typed in
JSTFY
mode:
Retype the entire line until the printer automatically returns
to the next line
Press
CANCEL
((^ ) until all characters are deleted from
the display and the primer advances to the end of the
previous line
BACKSPACE
to position the printer to the right of the
error
38