Panasonic OMNIVISION VHS PV-M2058 - Manual (Page 12)

^Picture Adjustment
‘Important: If the remote control POWER, CH AW , ACTION, PROG, INDEX, ON-TIMER, R-TUNE, FM/TV
and ADD/DLT button does not work when pressed, press the TVA/CR button on the remote and
try the button again.
|\^Check list before you begin.
Q All connections are made (see page 5).
□ Your Combination VCR is piugged in.
1
Press ACTION* to display the
MAIN MENU.
2
Press
AWO^
to select “TV,”
and then press ACTION to
display the SET UP TV screen.
SELECT : A T ► KEY
SET lACTION KEY
Model PV-M2058 remote
is shown here.
3
Press AT to select “VIDEO
ADJUST,” and then press
► to display the VIDEO
ADJUST screen.
.............. SET UP TV .....................
CAPTI ON
I NPirr SELECT : TUNER
VIDEO ADJUST
SELECT:A T KEY
SET :► KEY
END :ACTION KEY
4
Press AT repeatedly to select
the desired adjust item, and
then press to adjust. (See
description below.) ..... I....
TINT I........
BRIGHTNESS ........... I........
PICTURE .............................^
SHARPNESS ............ I........
NORMAL
SELECT;* ▼ KEY
ADUUST:-« ► KEY
END lACTION KEY
To Reset Picture Controls to the Factory Setting
Press AT and ► to select and
set “NORMAL.”
All controls return to their factory
settings.
COLOR ...................... I........
TINT
I........
BRIGHTNESS ........... I........
PICTURE ............................. \
SHARPNESS ............ I........
SELECT:* ▼ KEY
SET : ► KEY
END ;ACTION KEY
5
Press ACTION three times to return to the normal
screen.
• If no button is pressed within 5 minutes, the video adjust overlay
disappears.
Picture Adjustment
COLOR Control
To adjust the intensity of the color.
TINT Control
To adjust for the most natural fleshtones.
BRIGHTNESS Control
To adjust the brightness of the picture.
PICTURE Control
To adjust the intensity of the picture by adjusting contrast and
color level at the same time and in the proper balance.
SHARPNESS Control
To adjust the sharpness of the picture.
12