Panasonic OMNIVISION VHS PV-M2058 - Manual (Page 27)

511^ MTS Broadcast/TV Stereo System
|\X Check list before you begin.
n All connections are made (see page 5).
□ Your Combination VCR is plugged in.
IMPORTANT NOTE:
This stereo system is designed
for TV viewing oniy. Recording
and playback will always be in
monaural.
<For Model PV-M2058 only>
Receivable Broadcast Types
The following are possible broadcast types with their accompanying
on-screen displays. The signal being received is indicated with an “ ((("
mark while the selected audio mode is indicated with an arrow. To cnange
the audio mode for these broadcasts, follow the “Select Audio Mode for TV
Viewing” section (below).
Press DISPLAY to display the broadcast signal currently
being received and the selected audio mode.
MTS stereo and SAP broadcast
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously. Select the
STEREO or SAP audio mode as desired.
MTS stereo broadcast
Multi-channel Television Sound Stereo
broadcast is being received. Select the
STEREO audio mode.
• If a stereo broadcast is weak and the
display flickers, you may want to select the
MONO audio mode for better results.
SAP broadcast
Secondary Audio Program (sub language)
broadcast is being received. Select SAP
audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast is being
received.
STOP 12:00AM ABC
1 1:00:00
►STEREO *-
► SAP
MONO
SP
12:00AM ABC 0
:
00:00
(k STEREO •-
SAP
M0^0
STOP 12:00AM ABC
0 : 00:00
STEREO SP
(kSAP *-
MONO
STOP 12 : 00AM ABC
0:00:00
STEREO
SAP
MONO •- SP
Select Audio Mode for TV Viewing
Press AUDIO to select the desired audio mode as described
above. {Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown below.
< Example >
Press
AUDIO
STOP 12:00AM ABC
0 : 00:00
(k STEREO *-
SAP
MONO
r
Press
AUDIO
STOP 12:00AM ABC
0 : 00:00
►STEREO
SAP •-
MONO
I
Press
AUDIO
STOP 12:00AM ABC
0:00:00
► STEREO SP
SAP
MONO •-
27