Panasonic OMNIVISION VHS PV-M2058 - Manual (Page 22)

spÉ^ Special VCR Features (continued)
*lmportant: If the remote control
POWER, C H A T ,
ACTION, PROG,
INDEX, ON-TIMER,
R-TUNE, FM/TV and
ADD/DLT button does
not work when pressed,
press the TVA/CR
button on the remote
and try the button
again.
|\^Check list before you begin.
Q The clock is set to correct time.
2
3
b
C
Model PV-M2058 remote
is shown here.
Time Stamp Feature
For about the first 10 seconds of each recording, the Combination VCR
automatically writes the following program data on the tape: Date,
Start time, Scheduled stop time (for Timer Rec. only), Channel No. and
Category (for Timer Rec. only). Then if playback is started at the starting
point of the recording, this information will be displayed about 7 seconds
after playback begins for a few seconds.
1
Press ACTION* to display the MAIN
MENU.
2
Press to select “VCR,”
and then press ACTION to display
the SET UP VCR screen.
Press
AT
to select ‘TIME
STAMP,” and then press
► to select “ON” or “OFF.”
• When “OFP is selected, the program data
is written on the tape, but will not be
displayed for the first 5 seconds of playback.
SELECT : A » ^ ► KEY
SET :ACTION KEY
_____
REPEAT PLAY ON
BEEPER OFF
NOISY CH BLUE BACK ON
ЗЭЭ
SELECT;A ▼ KEY
SET :► KEY
END :ACT10N KEY
Press ACTION twice to return to the normal screen.
<Time Stamp Example >
Normal/ One Touch T|„,er Recording
Recording
When Clock is not
set...
12/28/1990 MON
12:00PM
CH 08 ABC
12/28/1998 MON
12:00PM -
1100PM
CH 08 ABC SPORTS
If the tape speed is changed immediately after recording begins, the
display may be incorrect.
Blue Back ON/OFF Feature
You may choose whether or not you want the Combination VCR to display
a solid blue back screen when the broadcast signal is very weak.
Э
Press ACTION to display the MAIN
MENU.
b
Press
AT
to select “VCR,” and
then press ACTION to display the
SETUP VCR screen.
SELECT : A ▼ 4 ► KEY
SET :ACT I ON KEY
C
Press
AT
to select “NOISY CH
BLUE BACK,” and then press
► to select “ON” or "OFF.”
• When “ON” is selected, a solid blue screen
appears whenever the signal is weak or
nonexistent. When "OFF is selected, the
picture is displayed regardless of the signal
condition.
------------ SET UP VCR .....................
REPEAT PLAY
BEEPER
:ON
:OFF
NOISY CH BLUE BACK:ON
TIME STAMP ;C
SELECT:A ▼ KEY
SET ;► KEY
END
:ACT I ON KEY
The picture cannot always be seen clearly when OFF is selected.
22
Press ACTION twice to return to the normal screen.