Panasonic OMNIVISION VHS PV-M2058 - Manual (Page 13)

g TV Timer Features
kX Check list before you begin.
Q All connections are made (see page 5).
Q Your Combination VCR is plugged in.
On-Timer with Alarm Feature
The Combination VCR can be set to automatically power on in one of 3
modes (TV, Playback, or FM radio). You can also combine the On-Timer
with a one minute alarm that gradually increases in volume.
Model PV-M2058 unit is shown here.
Model PV-M2058 remote
is shown here.
Press ON-TIMER to display the ON
TIMER screen.
Press to select and ► to fix
the On-Timer time and also to
choose the On-Timer mode {TV,
PLAY, or FM radio). See the AV
selection order shown below.
• Make sure a tape is inserted if Playback
mode is selected.
• See “FM Radio Feature” on page 15 for
instructions on how to preset FM stations.
CH02—CH03..... CH125
------- -tt/ON n>IMER........................
6:-AM CH
ALwilrOt/l''
SELECT:* ▼ KEY
SET :► KEY
END :ON-TIMEfiKEV
.............. ON TIUEIB -------------------
6:00AM CH 08
ALARMiON ' I ABC'
^нишшзнпаа
CANCEL
SELECT
SET
END AOD/DLT KEY
* » KEY
► KEY
ON-TIMER KEY
r
CHOI
W m 9—FM8 ■FM1
.............. ON TIMER .......................
6:00AM CH08
Евоагаш'
O Press AV to select alarm “ON” or
“OFF.”
When “ON” is selected,
an alarm will gradually increase in
volume for one minute or until cancelled
by pressing any button on the remote or
Combination VCR (including VOL ). When the alarm sound
stops, the sound of the mode you selected will ensue.
To Make Corrections,
use AT and to move back and correct as necessary.
CANCEL
SELECT
SET
END AOO/OLT KEY
* ▼ KEY
► KEY
ON-TIMER KEY
Press ON-TIMER to set the On
Timer. This screen will appear for
about 5 seconds.
• The ON TIMER indicator lights on the front
panel.
ON TIMER SET
To cancel,
press ON-TIMER to redisplay the screen in step 3. Then, press
ADD/DLT to clear the time (“6" is flashing). Now, press ON-TIMER
to end. “ON TIMER END” appears on-screen for a few seconds.
If no button on the remote or Combination VCR (including
a button used to turn off the alarm) is pressed within 60
minutes after the Combination VCR turns itself on, it will
turn itself back off.
Set the Sleep Timer
The Combination VCR can be set for auto power off.
Press SLEEP repeatedly to set the sleep
timer.
• Each press will change the time in the order shown
at right.
• If you press DISPLAY with the SLEEP TIMER set,
the remaining time will appear on-screen.
To Cancel, press SLEEP repeatedly until “SLEEP TIMER 00" appears.
SLEEP TIMER 30
♦
SLEEP TIMER 60
♦
SLEEP TIMER 90
♦
SLEEP TIMER 00
13