Panasonic OMNIVISION VHS PV-M2058 - Manual (Page 26)

i( <i
^ )v Tape Operation (continued)
‘Important: If the remote control POWER, CH AT , ACTION, PROG, INDEX, ON-TIMER, R-TUNE, FM/TV and ADD/DLT
button does not work when pressed, press the TVA/CR button on the remote and try the button again.
Your Combination VCR is equipped with RCpOdt PlSy
You can set your Combination VCR up to play a recording over and over.
several time saving features as well as
convenient automatic functions which
make tape operation easier than ever.
2
3
A d
Model PV-M2058 remote
is shown here.
1
Press ACTION* to display the MAIN
MENU.
2
Press
AT^^
to select “VCR,”
and then press ACTION to display
the SET UP VCR screen.
3
Press AT to select “REPEAT
PLAY,” and then press ►
repeatedly to select “ON” or “OFF.”
SELECT :* ▼ ► KEY
SET : ACTION KEY
------------SET UP VCR-------------------
wsssMsss^^Ea
BEEPER :OFF
NOISY CH BLUE BACKON
TIME STAMP
;OFF
SELECT;A T KEY
SET :► KEY
END [ACTION KEY
When REPEAT PLAY : ON is selected
(the REPEAT indicator lights on the front
panel during playback), the Combination VCR will playback the
tape to its end, or until a blank portion of 30 seconds or more is
reached. (Erased portions of tape are not considered blank.) The
tape is then automatically rewound and played again. This
operation is repeated until you cancel Repeat Play.
All function buttons (REW, FF, etc.) are operational during Repeat Play
% Press ACTION twice to return to the normal screen.
You may also turn the repeat play feature on and off at the
Combination VCR. During playback, press PLAY/REPEAT
on the Combination VCR once or twice until the REPEAT
indicator lights up (ON), or goes out (OFF).
Auto Operation Functions
Auto Shut Off
In TV or NITE/GAME mode, when a
broadcast signal is not received for 5
minutes, the Combination VCR will
automatically power off (except when
LINE INPUT is selected).
In Playback mode, when a Video signal
is not detected for 5 minutes, the
Combination VCR will automatically
power off and the tape will be rewound.
• This feature is deactivated when any
button on the unit or remote control is
pressed even if there is no signal present.
Auto Playback
When a tape is inserted, the power
turns on (Auto). If the record tab* is
removed, playback begins (Auto).
Auto Rewind
When a tape reaches its end during playback
or fast forward the Combination VCR will
rewind the tape and go into Stop mode.
Playback Auto Eject
(Repeat Play is “OFF.")
When a tape without a record tab* is
played to its end, the Combination VCR
will rewind and then eject the tape.
Memory Rewind Off
When POWER is pressed during tape
rewind, rewinding will be completed even
though the Combination VCR turns off.
* For record tab information, see page 32,
26
One Minute Skip
With this feature, you can skip over commercials recorded on a tape.
A
Press ZERO/1 MIN in Play mode.
• The Combination VCR will go into FF search mode and skip over 60
seconds of recorded time. Then, normal playback will resume.
Zero Search
You can reset the Time Counter to zero and then return to that point.
3 Press DISPLAY to display the Time
Counter overlay during playback.
b
Press COUNTER Model
RESET to reset the Time PV-M2058
Counter to “0:00:00” at ^
the desired position.
C
Continue playback, rewind, or
fast forward.
STOP 12:00AM
0
. ► STEREO
► SAP
MONO
ABC
00:30
SP
STOP 12:00AM ABC
0 00:00
STEREO*- SP
frSAP
MONO
Press ZERO/1 MIN in Stop mode when you want to
return to “0:00:00.”
• The Combination VCR will go into FF or REW mode and stop at the
last point the Time Counter was set to 0:00:00.