To erase all characters in the editing area, To determine the display position of the camera id, Notes – Panasonic WV-CPR650 User Manual
Page 26: To return to the cam set up menu, Light control setting (alc/elc)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Move the pointer to the character to be edited by
pressing ^ or [^, Then move the cursor to the
character area and select a ne\w character,
3. Press to determine the CAMERA ID.
To erase all characters in the editing area
Move the cursor to RESET and press Csl ■ All charac
ters in the editing area disappear.
To determine the display position of the CAMERA
ID
1. Move the cursor to POSI, and press El ■ The dis
play shown below appears and the CAMERA ID
starts blinking.
Blinking
3,
Move the CAMERA ID to the desired position by
pressing
Press E3 to fix the position of the CAMERA ID.
The mode returns to the previous CAMERA ID
menu.
Notes:
• The CAMERA ID stops at the edges of the
monitor screen.
• The CAMERA ID moves faster if any of ^ /
is kept pressed for a second or
longer.
To return to the CAM SET UP menu
Move the cursor to RET and press El ■ The CAM SET
UP menu appears.
2. Light Control Setting (ALC/ELC)
You can select the light control mode according to the
lens type,
ALC: If you use the auto iris lens, select this parameter.
ELC: If you use a fixed or manual iris lens, select this
parameter.
c
---------
-- \
** СЛМ
SET DP « •
САИЕВА ID
OFF “1
ALC/EDC
“1
SHUTTER
AGC
ON
SENS DP
OFF
SYNC
IHT
WHITE B&L
ATW “1
MOTION LET
OFF "1
HENS DRIVE
DC
^ RET
__ >
Move the cursor to the ALC/ELC parameter.
Select ALC or ELC.
-24-