Printing a test pattern, Printing a test pattern -11 – Panasonic KX-F2350NZ User Manual
Page 121
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Printing a test pattern
You can check the print quality of your unit by printing the test pattern.
if the test pattern has any blurred points or lines or a dirty pattern, please clean the thermal head
following the instructions on page 6-10.
To obtain the test pattern, follow the steps below.
Press the PROGRAM button.
The display shows “P- ”.
Press #, then press 28.
The display shows “P-F28”.
Press the START button.
The unit prints the pattern as shown below.
Press the PROGRAM button to end the operation.
Sample of test pattern:
6-11
Advertising
This manual is related to the following products: