Programming a remote fax activation code, Qc3q, Note – Panasonic KX-F2350NZ User Manual
Page 79: Programming a remote fax activation code -13, Ctciiicz)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Programming a remote fax activation code
Your code can be from 2 to 4 digits long. The numbers 0 through 9 and characters # and + may be
used. (e.g.
123,123-ii^)
Press the PROGRAM button.
The display shows “P-
3
Q2
ABC
CTCIIiCZ)
OHI
JKL
MWO
QQQ
PftS
T\IV
WXY
C
j
JCDCD
QC3Q
Press #, then press 20.
The display shows “P-F20 S
h
”.
Enter the new code number using the dial keypad.
Press the SET button to store your program into memory.
The display shows “P- ".
Press the PROGRAM button to end the operation.
NOTE:
“S” on the display indicates ^
on the display indicates
4-13
Advertising
This manual is related to the following products: