Qc3c3, Note, Setting the remote code (remote tad id) for remote – Panasonic KX-F2350NZ User Manual
Page 40: Tad operation -32, Сзсзсз, C3qci] qc3c3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the remote code (REMOTE TAD ID) for remote
TAD operation
The REMOTE TAD ID is used to access your answering device (TAD) from a remote location with a
touch tone phone. See pages 4-19 to 4-24.
Using this code, you can retrieve incoming messages recorded on the microcassette tape from a
remote location.
The REMOTE TAD ID is preset to 111. If you wish to change the number, you can choose any
number from 111 to 999 except numbers including “0".
For proper operation, make sure that the REMOTE TAD ID number is different from your
PRIVACY RING ID number (see page 4-25).
3
гтг^Гт
QW
JKL
UNO
сзсзсз
Prt
TUV
WMY
C3QCi]
QC3C3
Press the PROGRAM button.
The display shows “P- ”.
Press #, then press 08.
The display shows “P-F08 111”.
Enter the desired REMOTE TAD ID using the dial
keypad.
To correct an error while programming, press the
STOP/CLEAR button then correct input.
Press the SET button to store your selection into
memory.
The display shows “P- ”.
Press the PROGRAM button to end the operation.
The display shows the current time.
NOTE:
We recommend that you do not use seven (7) as a code number, since this number is used as
the greeting message re-recording command for remote operations.
1-32
'
. . .