Helpful hints, Cdcdci) – Panasonic KX-F2350NZ User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the number of rings to answer in the ANS/FAX
mode
When in the ANS/FAX mode, the unit wilt automatically answer on the second ring when receiving
call.
If you wish to change the number of rings to answer a call, you can choose among the following:
Toil Saver (see page 1-29).
The unit answers on the second ring (default).
The unit answers on the third ring.
The unit answers on the fourth ring.
The unit will not ring (RINGER OFF).
HELPFUL HINTS:
• if you wish to have the opportunity to pick up the handset before the call is answered by the unit,
set the number of rings to “3” or “4”.
• If you find there is difficulty in fax receiving from machines that have an automatic transmission
feature, set the number of rings to
“
2
" .
•To confirm from the remote phone whether a new incoming message has been recorded or not
(see pages 4-19 to 4-24), select the Toll Saver position. This will save you the toll charge for the
3
C
j
DQCD
QHI
JKL
MNO
QQQ
PflS
TUV
wxy
CDCDCI)
QQQ
Press the PROGRAM button.
The display shows “P-
Press #, then press
05.
The display shows “P-F05 2".
Press the number of the selection you desire.
Setting selections are:
0: Toll Saver
2: two rings
3: three rings
4: four rings
Ringer Off
Press the SET button to store your selection into
memory.
The display shows “P-
(continued)
1-28