Panasonic KX-F2350NZ - Manual (Page 90)

Re-recording a greeting message
You can change the content of your greeting message from a remote telephone.
1
2
Call your unit, then dial your REMOTE TAD ID wi
greeting message is playing.
Press 7 to start re-recording after hearing the bet
indicate the number of recorded messages.
3
4
After hearing a long beep, speak clearly and loud
up to 16 seconds.
When finished, press 9.
The new greeting message is played to confirm th
change.
NOTE:
If you pause for over 2 seconds white recording, the unit beeps and stops the greeting mes
recording. In this case, repeat from Step 2 within 10 seconds.
4-24