Dbgas 2000 installation – Eclipse Combustion EGA4 User Manual
Page 37
Instruction Manual MM850481 ed.01
N
OTE
: T
HE FUEL DATA TRANSFER FROM ANALYZER SHOULD BE MADE AFTER THE PROGRAM INSTALLATION OR IF THE FUEL DATA
CHANGES ON THE ANALYZER
.
IMPORTANT
T
O CHANGE OR ADD NEW FUELS DATA
,
YOU HAVE TO USE
G
AS
C
ONFIG SOFTWARE
. T
HE INSTRUCTIONS ARE SHOWN ON
9.2
PARAGRAPH
.
8.4.4
DBGas 2000 Installation
DBGas 2000 runs on IBM PC under WINDOWS 95/98/NT. Minimum requirements are a Pentium CPU with 16Mbyte
Ram and 20 Mbyte on hard disk, a color monitor and a Microsoft mouse or a compatible one.
In order to install DBGas 2000 for Windows, follow the below procedure:
• Place the DBGas 2000 disk in a CD-ROM drive;
• From the Windows Start Menu, select <RUN>;
• Enter the filename D:SETUP.EXE (substitute the letter D for the disk drive that contains DBGas 2000 disk)
• Follow the on screen instructions making sure to provide the correct path to your DBGas 2000 directory when
prompted.
Once installed, the DBGas 2000 icon will appear on your Windows screen and it will be possible to boot it by clicking on
the icon as usual.
37