Clarion VRX766VD - Manual (Page 30)

Basic Operations
30
VRX766VD
English
Owner
’s ma
nua
l
2-ZONE Function
About the 2-ZONE function
The 2-ZONE function is a function that outputs
separate sounds/images from the MAIN zone
and SUB zone (such as the optional rear monitor)
by simultaneously operating two sources in the
one center unit. Thereby, plural listeners are
allowed to enjoy separate audio/visual sources.
The 2-ZONE function allows internal sources
(TUNER, DVD, VISUAL, iPod) and external
sources via CeNET connection (CD changer, TV,
etc.) to be played on MAIN zone and SUB zone.
Controlling sources of MAIN zone and SUB zone
can be made from the main unit and from the
remote control unit.
The source sounds of the MAIN zone are played
back from the speakers of the vehicle side, and
those of the SUB zone are from the headphone
systems (WH104).
Sound volume control on the SUB zone is
performed by the headphone system (WH104).
Note:
• Radio stations cannot be selected when the SUB
zone is selected.
• The external different equipments connected via
CeNET cannot simultaneously be used in the
MAIN and SUB zones. Though the same
equipment can be specified simultaneously.
• If the 5.1 channel surround decoder (DVC940) is
connected, this function is disabled.
• When an external equipment is specified for the
SUB zone, the 2-ZONE function is turned off if the
function of audio mute for cellular phone is turned
on or off.
• The SUB zone cannot be controlled when the
function of audio mute for cellular phone is turned
on.
• When the 2-ZONE function is turned on, the VTR
mode cannot be specified for both of the MAIN and
SUB zones simultaneously.
Setting the 2-ZONE function
* The factory default setting is “OFF”.
1. Press the [SRC] button to display the Source
menu.
2. Touch and hold the [2 ZONE] key more than
1 second to turn the 2-ZONE function on.
The 2-ZONE indication is displayed at the top
left of the screen.
* The function can also be switched by using the
optional remote control unit. See the chapter “6.
REMOTE CONTROL” for details.
3. Touch the [SUB] key on the Source menu to
switch to the SUB zone.
You can control the operation modes for the
SUB zone.
4. Press the [SRC] button, and touch the [MAIN]
key to return to the MAIN zone.
5. To turn the 2-ZONE function off, touch the [2
ZONE] key on the Source menu.
Displayed when 2-ZONE function is
turned on.
• [MAIN]:MAIN zone is selected.
• [SUB]:SUB zone is selected.
2-ZONE indication
280QC6823KA_00.0_EN.book Page 30 Monday, February 27, 2006 9:22 AM