Clarion VRX766VD - Manual (Page 62)

5.1 ch Surround Decoder Operations
62
VRX766VD
English
Owner
’s ma
nua
l
Selecting the Dolby PL II (Dolby Pro
Logic II ) type
* The factory default setting is “OFF”.
* This setting is disabled when both the CENTER
SP and SURROUND SP items of the SPEAKER
SEL setting are set to “OFF”.
1. Press the [ADJ] button, and touch the
[AUDIO] key.
2. Touch the [ ]] key of the Dolby PL II item.
3. Touch the key for the desirable type to select.
4. Touch the [Back] key to return to the previous
screen.
Output adjustment of subwoofer
volume, center volume and balance/
fader
1. Press the [ADJ] button, and touch the
[AUDIO] key.
2. Touch the [ ]] key of the DETAIL item to
display the submenu.
3. Perform the following adjustments:
●Subwoofer volume adjustment
●Center volume adjustment
●Balance/Fader adjustment
4. Touch the [Back] key to return to the previous
screen.
3-1. Touch the [ [] or []] key of the SUBWOOFER
VOL item to adjust to desirable level (Setting
range : –6 to 3).
* The factory default setting is “0”.
3-1. Touch the [ [] or []] key of the CENTER VOL
item to adjust to desirable level (Setting
range : –6 to 0).
* The factory default is “0”.
3-1. Touch the [ ]] key of the BAL/FAD item.
Touch the [ {] or [}] key to adjust the fader
level.
[ {] key :
emphasized the sound from the front
speakers.
[ }] key :
emphasized the sound from the rear
speakers.
3-2. Touch the [ [] or []] key to adjust the balance
level.
[ [] key :
emphasized the sound from the left
speakers.
[
]] key :
emphasized the sound from the right
speakers.
280QC6823KA_00.0_EN.book Page 62 Monday, February 27, 2006 9:22 AM