Clarion VRX766VD - Manual (Page 6)

6
VRX766VD
English
Owner
’s ma
nua
l
4. NOMENCLATURE
Names of Buttons
Note:
• Be sure to read this chapter while referring to the
front diagrams for chapter “3.CONTROLS” on
page 5 (unfold).
[ E], [e] buttons
• Use these buttons to increase/decrease the
volume.
[ p] button
• Press this button to enter the play pause mode
in the DVD PLAYER/iPod/changer modes.
Press the button again to resume playback.
• Keep pressing this button more than 1 second
to mute the sound in the DVD PLAYER/iPod/
changer modes.
• Press this button to mute the sound in the
TUNER/TV/VISUAL modes.
[SRC] button
• Press this button to turn on the power. Keep
pressing this button more than 1 second to turn
off the power.
• When the liquid crystal panel closed, press this
button to change to the next mode such as
TUNER mode.
• When the liquid crystal panel open, press this
button to display the Source menu screen to
switch the mode.
[ R], [F] buttons
• Use these buttons to change to the previous/
next preset station in the TUNER/TV modes.
• Use these buttons to select a track in the CD,
Video CD, MP3/WMA, iPod and CD changer
modes.
• Use these buttons to select a chapter in the
DVD video and DVD changer modes.
[BAND] button
• Press this button to switch the receiving bands
for TUNER/TV modes. Keep pressing this
button more than 1 second to switch the Seek/
Manual tuning modes.
• Use this button to move to the first track in the
CD, Video CD and iPod modes, or the first
chapter in the DVD video mode.
• Use this button to move to the next folder in the
MP3/WMA mode.
• Use this button to switch to the next disc in the
changer modes.
• Keep pressing this button more than 1 second
to play all tracks in the iPod mode.
[iPod] button
• Press this button to switch to the iPod mode.
[CONT.] button
• Press this button to show/hide the key pad on
the menu screen of DVD video/Video CD.
[MENU] button
• Press this button to show the menu screen of
DVD video/Video CD. Keep pressing this
button more than 1 second to show the top
menu screen of DVD video.
[ADJ] button
• Press this button to enter/exit the ADJUST
mode to change the settings.
• Keep pressing this button more than 1 second
switches the liquid crystal panel to a composite
screen to lock the monitor (To enable this
function, go to the GENERAL menu (within the
ADJUST menu), and use the [CONNECT] key
to select “NAVI” or “OTHER”).
[MONI] button
• Press this button to enter/exit the Monitor
Adjust mode.
• Keep pressing this button more than 1 second
to turn off the back light of the liquid crystal
panel.
[ISR] button
• Use this button to enter/exit the ISR (Instant
Station Recall) standby mode.
• Keep pressing this button more than 2 seconds
to store the current station into ISR memory in
the radio mode.
* The [ISR] button is disabled when the SUB
zone is selected in the 2-ZONE mode.
[ o] (EJECT) button
• Use this button to eject the disc set in this unit.
[ P] (OPEN) button
• Use this button to open/close the liquid crystal
panel.
• Keep pressing this button more than 2 seconds
so that the liquid crystal panel is positioned
horizontally when the liquid crystal panel is
open (Air Conditioner Operation mode).
• When the liquid crystal panel closed, Keep
pressing this button more than 5 seconds to
perform the panel calibration function to
memorize the maximum angle of the liquid
crystal panel.
280QC6823KA_00.0_EN.book Page 6 Monday, February 27, 2006 9:22 AM