Clarion VRX766VD - Manual (Page 33)

Radio Operations
33
VRX766VD
English
Owner
’s ma
nua
l
Recalling a preset station
There are total of 24 preset positions (6-FM1, 6-
FM2, 6-FM3, 6-AM) to store individual radio
stations in memory.
There are 2 ways available to recall the preset
station.
●Using the [R] or [F] button
1. Press the [BAND] button to select the desired
band (FM or AM).
2. Press the [ R] or [F] button to recall the
previous or next stored station.
●Using the Preset List screen
1. Touch the [List] key.
2. Touch the corresponding Preset key to recall
the stored station.
* You can select the desired band by touching
the [Band] key.
* Touching and holding the desired Preset key
for more than 2 seconds will store the current
station to the preset memory.
3. Touch the [List] key to return to the previous
screen.
Manual memory
1. Touch the [Band] key to select the desired
band. (FM or AM)
2. Select the desired station with seek tuning,
manual tuning, or preset tuning.
3. Touch the [List] key.
4. Touch and hold one of the Preset key for more
than 2 seconds to store the current station into
the preset memory.
Auto store
Auto store is a function for storing up to 6 stations
that are automatically tuned in sequentially. If 6
receivable stations cannot be received, a
previously stored station remains unoverwritten
at the memory position.
1. Touch the [Band] key to select the desired
band. (FM or AM)
2. Touch the [List] key.
3. Touch and hold the [AS] key for more than 2
seconds.
A beep sounds and the stations with good
reception are stored automatically to the
preset channels.
Preset scan
Preset scan receives the stations stored in preset
memory in order. This function is useful when
searching for desired station in memory.
1. Touch the [List] key.
2. Touch the [PS] key to start preset scan. The
unit starts scanning each station for 7
seconds sequentially.
3. When the desired station is tuned in, touch the
[PS] key again to continue receiving that
station.
Instant station recall (ISR)
Instant station recall is a special radio preset that
instantly accesses a favorite radio station at a
touch of a button. The ISR function even
operates with the unit in other modes.
●ISR memory
1. Select the station that you wish to store in ISR
memory.
2. Keep pressing the [ISR] button more than 2
seconds to store the current station into the
ISR memory.
●Recalling a station with ISR
1. In any mode, press the [ISR] button to switch
to the TUNER mode and tune the selected
radio station. “ISR” appears in the display.
Press the [ISR] button again to return to the
previous mode.
* The [ISR] button is disabled when SUB zone is
selected in the 2-ZONE mode.
280QC6823KA_00.0_EN.book Page 33 Monday, February 27, 2006 9:22 AM