Clarion VRX766VD - Manual (Page 60)

5.1 ch Surround Decoder Operations
60
VRX766VD
English
Owner
’s ma
nua
l
●FILTER
This function is used to select filter frequencies
that suit the speakers that are used.
* This function is not available for speakers whose
SPEAKER SEL setting is set to “OFF”.
●SPEAKER GAIN
This function sets speaker output level.
* This function is not available for speakers whose
SPEAKER SEL setting is set to “OFF”.
●DELAY
This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.
* This function is not available for speakers whose
SPEAKER SEL setting is set to “OFF”.
●DRC
This function sets the dynamic range
compression.
3-1. Touch the [ ]] key of the FILTER item to
show the submenu.
3-2. Touch the [ [] or []] key of the FRONT HPF,
CENTER HPF, SURROUND HPF or SUB
WOOFER LPF item to adjust.
[FRONT HPF]:
This function can be set to the following four
settings: 50 Hz, 80 Hz, 120 Hz or THRGH
(through). “THRGH” is the default value.
[CENTER HPF]:
This function can be set to the following
three settings: 50 Hz, 80 Hz and 120 Hz.
“120 Hz” is the default value.
[SURROUND HPF]:
This function can be set to the following four
settings: 50 Hz, 80 Hz, 120 Hz or THRGH
(through). “THRGH” is the default value.
[SUB WOOFER LPF]:
This function can be set to the following
three settings: 50 Hz, 80 Hz and 120 Hz.
“120 Hz” is the default value.
3-1. Touch the [ ]] key of the SPEAKER GAIN
item to show the submenu.
3-2. Touch the [ [] or []] key of the FRONT L,
CENTER, FRONT R, SURROUND R,
SURROUND L or SUB WOOFER item to
adjust.
Each item is adjustable in the range –10 dB
to +10 dB in 1 dB step increments. The
default value is “0 dB”.
3-1. Touch the [ ]] key of the DELAY item to show
the submenu.
3-2. Touch the [ [] or []] key of the CENTER SP
or SURROUND SP item to adjust.
[CENTER SP]:
Adjustments are made in the range from 0
ms to 5 ms. The default value is “0 ms”.
[SURROUND SP]:
Adjustments are made in the range from 0
ms to 15 ms. The default value is “0 ms”.
3-1. Touch the [ C] key to display the next menu
screen.
3-2. Touch the [MAX], [STD] or [MIN] key of the
DRC item to select respective item.
* The default value is “MAX”.
280QC6823KA_00.0_EN.book Page 60 Monday, February 27, 2006 9:22 AM