Panasonic PV-V4621 - Manual (Page 13)

VCR’s Output Channel
"Important: If a remote control button does not
work when pressed, press the VCR
button on the remote and try the
button again.
■Time Zone Adjust
(Only when Auto Clock is set.)
1) Press ► to select
CLOCK.
VCR I C/A »CLOCKI
■'AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST
SELECT ; A T ►
I EXIT. _:ADTIQN UCALi*.____A.
2) Press AT to select
TIME ZONE ADJUST
VCR i CIA rCLOCkl CH
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST ■ 0
SELECT;A T SET:-« ►
EXIT _ : ACTION
»
and press ◄ or ► to
subtract or add hour(s)
as necessary.
3) Press ACTION.
4) Press POWER off to
perform AUTO
CLOCK SET.
• TIME ZONE ADJUST
returns to “0" if clock is
set manually.
■ VCR’s Output
Channel
1) Press AT to select
VCR’S OUTPUT CH.
rvgRn C/Al CLOClTI CH
REPEAT PLAY :OpF
TIME STAMP :ON
REMOTE WARNING :ON
AUTO
SHUT-OFF :ON
IDIOMAAJVNGUE ; ENGLISH
SELECT :A V SET:P
EXIT ;ACTIQN_____________
2) Press ►.
IF YOU PRESS ACTION
KEY, VCR’S OUTPUT CH
SWITCHES TO CH 4.
3) Press ACTION.
VCR 1 C7 a 1 clock I CH
PLEASE TUNE YOUR TV TO
CH 4.
After 3 seconds
VCR~~I C/Al CLOCK I CH
REPEAT PLAY
TIME STAMP
REMOTE WARNING
AUTO SHUT- OFF
IDIOMAJLANGUE : ENGLISH
^sEEBBaBBaei*
OFF“
ON
ON
ON
SELECT:A ▼ SET:P
To Make Corrections,
repeat step 1) ~ 3).
POWER
VCR
SELECT/
SET
AiPLAY
T-.STOP
◄ :REW
► :FF
NUMBER
keys
ACTION
ADD/DLT
CH A/T
Add or Delete a Channel
To* add channel:
Select channel with number
keys and press ADD/DLT.
channel os added
To delete channel:
Select channel with CH A / ▼ or
number keys and press ADD/DLT.
CHANNEL 08 DELETED
DST (Daylight Saving Time)
VCR automatically adjusts clock for
DST. (Page 9.)
Spring (First Sunday in April)
DST;ON -> Sets clock ahead one hou r.
Autumn (Last Sunday in October)
DST:ON -> Turns clock back one
hour.
• If your area does not observe
Daylight Saving Time, select
DST.’OFF.
• Keep these time changes in mind
when programming the VCR for
timer recordings.
13