Panasonic PV-V4621 - Manual (Page 35)

'Important: If a remote control button does not work when pressed, press
the VCR button on the remote and try the button again.
Tape Position and Tape Status Feature
m
Weak Signal Display ON/OFF Feature
To find out the present tape position.
Tape position cannot be detected for
VHS-C Cassette types and tapes of less
than 60 minutes length.
1 Press TAPE POSITION
to detect Tape Position.
^DETECTING TAPE POSITION J
Press TAPE POSITION
to return to normal screen.
This function cannot display exact amount o1
tape remaining for tapes over 120 minutes.
VCR Lock Feature
When set to ON, all operations except for
timer record and tape eject are prohibited.
Useful for households with small children.
To turn on,
hold down REC on the VCR
in Stop mode with no tape
inserted for 7 sec.
(Please ignore the NO
CASSETTE warning.)
To turn off,
repeat above.
• VCR Lock cancels in 24 hours If clock is set.
УСЯ l^K ACTIVATID
Auto Shut-Off Feature
When set to ON, VCR shuts off if blank tape is
played or no signal is detected for 5 min.
1 Press ACTION
to display menu.
'’VCR”] С/л1 clock ! CHÌ
R E P E A T ' 1 REPEAT I
TIME STAMP
REMOTE WARNING
Press AW
to select AUTO
SHUT-OFF and
press ► to set ON
or OFF.
Press ACTION
to return to normal screen.
When “ON,” picture is displayed regardless of
signal strength.
1
• “DETECTING TAPE
POSITION” only
appears the first time
a cassette is inserted
and it takes several
seconds for correct
indication to appear.
• The present tape
position indication is
displayed.
• The remaining tape
time (in minutes) is
displayed according
to the current tape
speed.
TIME STAMP Л Н
remote warning on
AUTO shut * OFF :ON
OOMA/LAMGOC: E n CUSH
VCR' S OUTPUT CH :3
Press ACTION
to display menu.
. vc S lcîa JS lqck T'CHANNa pci
fAN’
AU
antenna
AUTO SET
k
m m
VCR PhJt4 CH 5E:T UP
ON:
Press
to select and display
CHANNEL,
press
to select WEAK
SIGNAL DISPLAY,
and press ► to set
ON or OFF.
Picture is displayed regardless of signal
condition, and may not always be clearly
visible.
OFF: Screen turns solid blue when signal is
weak or non-existant.
Selecting ON has no effect on connected
equipment with blue back feature.
3 Press ACTION
to return to normal screen.
Remote Warning ON/OFF Feature
If Multi-brand feature is used (page 22), and
this feature is set to on, a warning appears
whenever an invalid key is pressed in TV, DSS,
or Cable mode.
1 Press ACTION
to display menu.
rv6R~i c/ÂLsu^X cS
REPEAT M ay off [
I TIME STAMP________ON I
AUTO SHUT* OFF
IDIOMA/LANGUE : ENGLISH
VCR S OUTPUT CM :3
Press AT
to select REMOTE
WARNING and
press ► to set ON or
OFF.
• It “OFF,” remote
warning wilt not
appear if invalid
key is pressed.
Press ACTION
to return to normal screen.
35