Panasonic PV-V4621 - Manual (Page 31)

‘Important; If a remote control button does not work when pressed, press
• the VCR button on the remote and try the button again.
SELECT/
SET
A :PLAY
▼ ;STOP
► :FF
NUMBER
keys
COUNTER
RESET
DISPLAY
SEARCH
M/A SKIP
CA/ZERO
Repeat Play
Set to playback a recording over and over,
1 Press ACTION
to display menu.
cm I CLOCin CH
TiUE STAJlJP
REMOTE WARNINQ ON
AUTO SHUT-OFF OH
S-VMS ET OFF
IDIOMArLANQUE : ENGLISH
VCfrs 0«JTTVTCH :3
SELECT:* » SETi^
EXIT :ACTI CW___________
Press AT
to select REPEAT
PLAY and press ► to
set ON or OFF.
Play repeats at tape
end or if unrecorded
portion over 30 sec.
is detected.
Press ACTION
to return to normal screen.
Zero Search
To quickly return to a specified tape location.
1 Press DISPLAY during play
to display Counter.
FlAV t?;OOAM
i_; 1 '-)
BEGIN END
Press COUNTER
RESET at desired
position
to reset to “0:00:00"
Continue to record, playback etc.
Press Stop.
EGlN T nd
Press CA/ZERO
in Stop mode
to start ZERO
SEARCH.
• Unit will go into FF
or REW mode and
stop at the last
point the Counter
was set to 0:00:00.
If a blank portion exists on the
tape, and depending on the position
of the V mark, the V mark display
position may not be accurate.
Auto Operation Functions
m Auto Play
Insert a tape --> Power comes on,
->Play starts if no record tab
(see pg. 4).
I Auto Rewind
Play
Manual Record
Fast Forward ?
--> Tape end,
">Rewind
m Play Auto Eject
(Repeat Play must be off)
Play, -->Tape end, ->Rewind,
-*>Tape ejects if no record tab 31