Sending a document by relayed transmission, Relayed transmission – Panasonic PANAFAX UF-550 User Manual
Page 137
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Relayed Transmission ^
Sending a Document by Relayed Transmission
Once you have recorded ail the necessary parameters in your machine in accordance with the Reiay Network
you belong to, you can send a document to two or more stations in the network system, automatically, using
the procedure below.
1
ENTER STATION(S)
THEN PRESS START 00%
Set document(s) face down.
FUNCTION
3
a
ENTER
STATION{S)
THEN PRESS START
3
Dial by any combination of the following methods:
• One-Touch Dialling
• Abbreviated Dialling
• Directory Search Dialling, press I SET ~l after each
station is entered
(For details, see page 46 to 49.)
Ex:
01
<01> (Station name)
5551234
4
The document is stored into memory and your machine
starts to dial the number of the Relay Station and sends the
document.
After the Relay Station finishes its transmission to the End
Receiving Stations, your machine prints out a RELAY XMT
RESULT REPORT sent back by the Relay Station.
STORE *
N0.001
PAGES=01 01%
Note: You cannot use manual number dialling in step 3.
135