Automatic redialling, Manual redialling, To redial the last dialed number through adf – Panasonic PANAFAX UF-550 User Manual
Page 61: Automatic rediaiiing, Manuai rediaiiing, Sending documents
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Sending Documents
^
Redialling
Automatic Redialling
If the line is busy or there is no answer, your machine will redial the
number up to 3 times at 3 minutes interval. During that time, a
message will appear as shown to the right.
_____
A file number is shown at the upper right corner of the display if it
is a memory transmission file.
Manual Redialling
You can also redial the last dialed number manually by pressing the I REDIAL I key.
To redial the last dialed number through memory
WAIT TO DIAL N0.001
(Telephone number)
1
^//
Set document(s) face down.
ENTER STATION(S)
THEN PRESS START 00%
Make sure that the MEMORY lamp is on.
2
PAUSE/
REDIAL
V
3 (
o \
\ START
TEL. NO.
5551234
STORE *
N0.002
PAGES=01 01%
The document is stored into memory with a file number.
Then dials the last dialed number.
To redial the last dialed number through ADF
1
2
3
Set document(s) face down.
MEMORY
'
' Make sure that the lamp goes off.
PAUSE/
REDIAL
Your machine starts to dial the last dialed number.
* DIALLING * N0.002
5551234
ENTER STATION(S)
THEN PRESS START 00%
ENTER STATION
00
%
TEL. NO.
5551234
* DIALLING
5551234
in
Note:
1, While the unit is displaying "WAIT TO DIAL”, you can
press! REDIAL
I
to start redialling immediately.
2. While the unit is displaying ”DIALLING" and a message is heard through the monitor that the circuits are
busy
...... you can press REDIAL to sfarf redialling immediately.
59