Setting the fax parameters, Customizing your machine – Panasonic PANAFAX UF-550 User Manual
Page 36
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Customizing Your Machine
Your facsimile machine has a variety of adjustable Fax Parameters. These parameters, listed in the Parameter
Table, are preset for you and do not need to be changed. If you do want to make a change, read the table
carefully. Some parameters, such as the Resolution, Contrast, and Verification Stamp parameters, can be
temporarily changed by simple key operation just before a transmission is made. When the transmission ends,
however, these parameters return to their preset values (Home position). Other parameters can only be changed
by the procedure described below.
Setting the Fax Parameters
1
FUNCTION
\ f
c
75
SET MODE
ENTER NO.
OR
(
1
-
6
)
V A
2
SET
75
FAX PARAMETER{01-99)
NO. =1
3
4
Enter Fax Parameter number from the Parameter Table
(see pages 35 to 38).
Ex: (0)© for CONTRAST
SET
75
FAX PARAMETER (01-99)
NO.=01
01 CONTRAST
1:NORMAL
5
6
Enter the new setting value.
Ex: ® for LIGHTER
SET
75
To set another parameter, press ICLEARI to return to step
3, or, to return to standby, press I STOP I.
01 CONTRAST
2;LIGHTER
02 RESOLUTION
1:STANDARD
m
Note:
1, To scroll the Fax Parameters in Step 2 or
4,
press
0 or 0.
2. To ptint out a Fax Parameter List, see page 151.
3. The built-in battery when fully charged can back up the Fax Parameter settings for up to 10 days
when a power failure occurs.
34