Setting the fax access code, Fax access code – Panasonic PANAFAX UF-550 User Manual
Page 86
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
► Fax Access Code
The Fax Access Code prevents an unauthorized user from operating the machine. Once a 4-digit Fax Access
Code
is
registered, no one can operate the machine without entering the correct access code.
Automatic Receiving, however, is always available. After you complete any operation, such as mode setting or
transmission, and the display returns to standby, you have to reenterthe access code in orderto use the machine
again. Registering the Fax Access Code does not affect the use of the machine in any other way.
Setting the Fax Access Code
1
FUNCTION I
i
D
SET MODE
tl-6)
ENTER NO.
OR V A
SET
FAX PARAMETER(01-99)
NO.=|
3
SET
38 FAX ACCESS CODE
nil
Enter a 4-digit Fax Access Code.
E
x
:©(D(3)©
3 8 FAX ACCESS CODE
1234
5
6
SET
For UF-550 skip to step 7. (The UF-550 cannot select
restriction level. ALL only.)
Select Restriction Level.
® for All operations
(2) for Setting and Printout of Fax Parameters only.
Ex: (2)
38 FAX ACCESS CODE
1:ALL
1234
38 FAX ACCESS CODE
2:FAX PARA. 1234
LU
Hotel To erase the Fax Access Code, enter Access Code and press
\
SET
i and follow the procedure above
to step 3, then press
I CLEAR 11 SET I
and
f STOP 1.
Q4