Contrast, Resolution, Basic transmission settings – Panasonic PANAFAX UF-550 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Transmission Settings
^
You can temporarily change the transmission settings either before or after you place the document on the ADR
These settings are as foiiows;
• Contrast
• Resolution
• Halftone
• Stamp
• Communication Journal
After your document has been sent, your machine will automatically return to the preset settings.
Contrast
Your machine is preset to Normai contrast, if you wish to send a document with iighter contrast, change the
setting to Lighter. If you wish to send a document with darker contrast, change the setting to Darker.
Press rcONTRASn to:
C3
DARKER
a
LIGHTER
CONTRAST
CONTRAST ^Normal
a DARKER
s, \
^
LIGHTER
CONTRAST
l„ -I
CONTRAST =Lighter
7
■■-DARKER
t=i
LIGHTER
CONTRAST
r: —_ 1
CONTRAST = Darker
m
Hotel To change the preset
Confrasf
position, change the setting of Fax Parameter No. 01, see page 35.
Resolution
Your machine is preset to Standard resolution, which is suitable for most documents.
Use Fine or Super Fine for detailed documents.
Press RESOLUTION to:
a S-FINE
CD FINE
RESOLUTION
izr: ZD
a S-FINE
RESOLUTION
C
□
RESOLUTION = Standard RESOLUTION = Fine
-■-S-FINE
C3 FINE
RESOLUTION
RESOLUTION = Super Fine
LU
Note: To change the preset Resolution position, chsnge the setting of Fax Parametsr No, 02, see page 35.
41