Panasonic LUMIX DMW-FL360 - Manual (Page 16)

Checking the
Flash’s Remaining
Battery Charge
® Install the batteries and then
turn on the unit and check the
battery remaining power.
1 Press the [POWER]
button.
@ If it takes as long for the [TEST/
CHARGE] button to light as the
period indicated in the table
below, it means that the
batteries are nearly worn out.
Replace them with fresh
batteries as soon as possible.
Alkaline batteries More
than 30 s
Rechargeable nickel
metal hydride
batteries
More
than 10 s
POWER
Q^O
® Charging now starts.
2 Check that the [TEST/
CHARGE] button lights.
® If the [TEST/CHARGE] button
and [AUTO CHECK] lamp both
flash at the same time, it means
that the batteries are almost
completely worn out and should
be replaced with fresh batteries
as soon as possible.
3 Press the [POWER]
button to turn off the
unit’s power.
m\.................
® When the [TEST/CHARGE]
(
1..
button is pressed, the unit may
mmmmm fire.
liiiiilllllllli
® Turn off the power in the
TEST/CHARGE
following situations:
o- i CUD
® When mounting the unit onto.
or disengaging it from, the
L
. ' iililB
digital camera
i
® When you do not want the
unit to fire
@ When you are not going to
After the batteries have been
use the unit
fully charged, the [TEST/
CHARGE] button lights.
16
VQT1B10