Pull out the wide panel and then push it down – Panasonic LUMIX DMW-FL360 User Manual
Page 37
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Use the built-in wide panel for
flash photography when the
focal length of the lens is wider
than 12 mm.
Set wide panel switching to
[ON]. (P40)
Pull out the wide panel
and then push it down.
panel.
2 Press the [ZOOM]
button, and select the
lighting angle.
When using the wide panel, the
guide number (GN) is reduced.
This means that the working
range is reduced when taking
photos in the [TTL AUTO], [AUTO]
or [FP TTL AUTO] mode and that
the optimum camera to subject
distance is reduced when taking
photos in the [MANUAL] or [FP
MANUAL] range.
After taking the photos, retract
the wide panel.
Do not push the wide panel
upward. Otherwise it may be
damaged.
4
n
irt
tUmti
ZOOM
i
1
m J
®
(A):
Lighting angle
® ZOOM, 8 mm or 10 mm [ZOOM,
16 mm or 20 mm for a 135
camera (35 mm film
conversion)] can be selected.
37
VQT1B10