Concerning continuous firing – Panasonic LUMIX DMW-FL360 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Concerning Continuous Firing
When the flash is fired continuously, its flash head becomes hot, and this
may possibly lead to deterioration or malfunction of the unit. Keep
continuous firing within the number of times given below, and then allow
the unit to rest for at least 10 minutes.
Restriction on number of flashes during continuous firing
Flash intensity
Flash interval
Restriction on
number of
flashes
1/1
(FULL)
6s
10
1/2
3s
20
1/4
1 s
40
1/8 to 1/128
0.5 s or less
80
Continuous firing is synchronized up to the number of frames listed
below. If the restriction on the number of flashes during continuous firing
is exceeded, allow the unit to rest for at least 10 minutes.
Number of frames for which continuous firing is possible (serial
photography speed: 8 frames per second)
Light quantity
1/4
^ No. of frames
............. 2.............
1/8
5
1/16
10
1/32
16
1/64
30
1/128
40
42
VQT1B10