Panasonic LUMIX DMW-FL360 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press the [MODE] button, and
select the flash mode. (P19)
» The optimum camera to subject
distance and guide number
(GN) matching the digital
camera settings are shown on
the display panel.
A):
Optimum camera to subject
distance
1 Turn the select dial and
set the guide number
(GN) so that the optimum
camera to subject
distance is set to the
distance to the subject.
The optimum camera to subject
distance changes depending on
the digital camera settings (ISO
sensitivity, aperture, focal length
and shutter speed).
Press the shutter button
all the way down, and
take the photo.
If the ISO sensitivity is [100], the
optimum camera to subject
distance can be calculated by
dividing the guide number (GN)
by the aperture. (P43)
The optimum camera to subject
distance is an estimate.
m
i 1
■“j ,r
C J - -
i If the optimum camera to subject
distance is closer than 0.6 m
(1.97 feet) [or 0.5 m (1.64 feet)
for close-up photos], the lighting
range of the flash will shift. In
this case, the user is warned by
the flashing of the optimum
camera to subject distance on
the display.
23
VQT1B10