1 press the [power] button on the unit, 2 press the [mode] button to select the flash mode – Panasonic LUMIX DMW-FL360 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Taking Pictures
using a Digitai
Camera without
Communication
Functions
® For details on each flash mode,
turn to P29 to 32.
1 Press the [POWER]
button on the unit.
® The [TEST/CHARGE] button
lights after the batteries have
been fully charged.
2 Press the [MODE] button
to select the flash mode.
MODE
Concerning the flash modes
Í nn
Í uu
J,U
®: Flash mode
® The flash mode is shown on the
display panel.
® The mode is changed each time
the [MODE] button is pressed.
Item
Details of settings
[AUTO]
The unit senses the
light by its flash
sensor in
accordance with the
aperture of the lens,
and it adjusts the
flash intensity. (P29)
[MANUAL]
The unit fires at the
guide number (GN)*
which has been set.
(P32)
The guide number (GN) is a
value which indicates the light
quantity of a flash. The higher
the value, the greater the
quantity of light emitted by the
unit.
28
VQT1B10