Panasonic LUMIX DMW-FL360 - Manual (Page 20)

Concerning the flash modes
Item Details of settings
[TTL AUTO] After measuring the appropriate flash intensity by
discharging a pre-flash, the unit fires again for
photo taking. (P21)
[AUTO] The unit senses the light by its flash sensor in
accordance with the aperture of the lens, and it
adjusts the flash intensity. (P22)
® This mode can be used only for digital camera
models with communication functions which
support the [AUTO] mode.
[MANUAL] The unit fires at the guide number (GN)* which
has been set. (P23)
[FP TTL AUTO] This mode enables flash photo taking even at the
high shutter speeds of the digital camera by FP
firing (repeatedly firing the flash at high speed).
(P24)
The unit initiates FP firing at the flash intensity set
in the [FP MANUAL] mode. (P25)
[FP MANUAL]
* The guide number (GN) is a value which indicates the light quantity of
a flash. The higher the value, the greater the quantity of light emitted
by the unit.
® You may not be able to use some modes depending on the type of
digital camera.
(O: Available, —: Not available)
DMC-ll K
[[TTLAUTO]^ [AUTOJ I m ANUA m ’ j MANUAL] I
' 0 ...........
DMC-FZ50 0 —
® It is not possible to select a mode which cannot be used.
20
VQT1B10