Panasonic NV-S99A - Manual (Page 19)

Video Cassette
When using a video cassette bearing the “P”
mark or an S-VHS-C video cassette, the
Remaining Tape Counter Indication may not be
very precise.
At every press of the [COUNTER] Button,
the Counter Indication will change as
follows;
0:00 00 Tape Counter indication
M 0:00.00
Memory Indication “M” appears
with Tape Counter Indication
oHooMoosooF VITC value (p. 54)
o
a
O
o
«
(Q
CD
Remarks, etc.
• If you playback a tape on which no recording has
ever been made, the Tape Counter Indication does
not change.
•If you take out the Cassette or remove the Battery
Pack, the Tape Counter automatically resets to
“ 0 : 00 . 00 ”.
•If you rewind the tape further than the tape counter
position “0:00.00”, the minus sign appears in front
of the Tape Counter Indication.
To Reset the Tape
Counter:
RESET
3
REW/Q ®/FF
•When you start recording or playback, the “R”
Indication flashes for a few seconds in the Viewfinder,
while the Movie Camera calculates the Remaining
Tape Time.
•When the Remaining Tape Time becomes less than
2 minutes, the Indication “R” and the Remaining Tape
Time start to flash.
19